Certified Cabling: What Fiber and Copper Test Reports Prove
A buyer's guide to Cat6, Cat6A and fiber certification, Tier 1 and Tier 2 testing, and what to require at closeout
Gagiteck Inc. · Published October 2026 · For IT managers, facilities teams and project managers buying structured cabling and fiber work
Summary
What a cabling certification report proves, how Tier 1 light-loss and Tier 2 OTDR fiber testing differ, and which test deliverables to write into your next cabling RFQ.
Key takeaways
- A certification report is the only proof that a cable run meets its category; a link light or a ping test is not.
- Cat6A supports 10 Gb/s Ethernet over the full 100-meter channel; Cat6 supports it only on shorter runs.
- Copper is certified as a permanent link (panel to jack) or a channel (including patch cords); your spec should say which.
- Tier 1 fiber testing measures total loss against a budget; Tier 2 adds an OTDR trace that locates every connector, splice and fault.
- Require test files in the tester's native format, not only PDFs, plus labels to TIA-606 and as-built drawings.
What's in the full guide
- Why certification matters
- Copper categories in brief
- Permanent link or channel
- Fiber Tier 1: light-loss testing
- Fiber Tier 2: OTDR traces
- What to require at closeout
- Red flags in a test report
- Checklist you can use on your next project